EnerSpan M-24: Boosting your R-value with premium NEOPOR insulation
EnerSpan M-24: Boosting your R-value with premium insulation
With a lot of EPS products available on the marketing today, Plasti-Fab decided to develop a product that uses graphite in the EPS bead to enhance the performance of the EPS, and pass the benefit on to you. You may be wondering how adding something we usually find in a #2 pencil can give you better insulation. Developed by the chemical company BASF, the graphite expanded polystyrene, known as GPS, is comprised of many small pockets of air within it’s make-up, containing graphite. The graphite reflects radiant heat energy like a mirror, increasing the material’s resistance to the flow of heat, or R-value. Most polymer-based foams exhibit a greater ability to slow the movement of heat as the temperature decreases. Neopor GPS is in a unique class because it increases in R-value as the temperature outside drops.
EnerSpan™ M-24 insulation by Plasti-Fab is manufactured using Neopor® provided by BASF, a graphite-enhanced (silver-gray in color) raw material, that reduces radiation heat transfer resulting in higher thermal resistance (R-value) compared to standard CAN/ULC-S701, Type 2 EPS insulation therefore making it a premium product.
The EnerSpan GPS is unique in that is classified as a SMART EPS. This is not just because it is a smart decision when insulating your home, office or commercial building. Read on to see the defined benefits of the Neopor insulation known as EnerSpan.
Stability and Durability
Neopor GPS is adaptable in size, thickness, shape and density, providing maximum flexibility and durability. And, Neopor GPS is stable as it consistently delivers the highest true R-value performance over time.
Neopor GPS is a breathable and semi-permeable high performance insulation that helps reduce the risk of mold, rot and structural damage associated with moisture condensation and long-term water retention.
Adaptable to all climate zones
Neopor GPS powers up when it gets cold outside. Insulating external walls with Neopor GPS increases the temperature of their inside surfaces which helps create a better indoor climate. And, Neopor GPS boards are thinner than others so the same effect is achieved with less material.
Neopor GPS uses up to 30% less material than other rigid foam insulation to achieve the same R-value, saving on building materials and installation labor.
Third-party validated and certified
Neopor GPS earned GREENGUARD Gold Certification and has been referenced by both The Collaborative for High Performance Schools (CHPS) and the Leadership in Energy and Environmental Design (LEED®) Building Rating System
Why use EnerSpan M-24 Insulation:
EnerSpan M-24 insulation board has an advantage of having all four of its edges shiplapped to ensure continuous insulation coverage. The closed cell structure of EnerSpan M-24 insulation contains only air so the R-value will not deteriorate over time. In addition, the closed cell structure of EnerSpan M-24 insulation resists water absorption so the higher R-value is retained even after direct exposure to water. The enhanced R-value is built to last and won’t deteriorate over time. The use of a graphite-enhanced raw material in the manufacture of EnerSpan M-24 insulation results in a constant R-value of R-4.53 per inch, a distinct premium over standard EPS. For a look at Plasti-Fab’s 100% Lifetime limited thermal warranty, click here. Other advantages include its versatility and adaptability for different applications as well as its cost-effectiveness to R-value.
EnerSpan M-24 insulation can be used for these following applications: Exterior Insulating Sheathing, Under Slab Insulation, Foundation Insulation and for Interior Basement Walls in your home. The product has a 100% R-value Warranty and installation methods are applicable as per local building codes..
For more information on Plasti-Fab’s EnerSpan M-24 insulation, click here.