Skip to content

Insulating Ice Rinks with PlastiSpan Insulation

January 9, 2017

Using PlastiSpan Insulation for Ice Rinks

ice-rinksWinter has officially arrived! Cold weather, mittens, scarves, etc. It’s all part of the season. However,  it’s still good to know that during this season there are several recreational activities available to enjoy with family and friends, including the popular ones like ice skating, curling and ice hockey.

These activities share a common place: the ice rink. Whether it’s a natural one where freezing happens from the cold climate temperatures, or from an artificial one, where a coolant creates cold temperatures in the surface below the water, ice rinks should ensure both quality and safety to fully provide the best possible winter experience.

Using Artificial Ice

In any climate, an arena surface of ice can be placed in a well-built space. It is composed of a bed of sand or at times a slab of concrete, through which pipes run. The pipes carry an icy fluid which can reduce the temperature of the slab so that water placed atop will freeze. This method is called ‘artificial ice’ to differentiate from ice rinks created by simply freezing water in cold temperature, indoors or outdoors, although both types are of icy water. A more proper technical term is ‘mechanically frozen’ ice.

Plasti-Span insulation: commercial solution for ice rinks

ir-2

With all the ice rink solutions, you may wonder how the ice stays frozen. Insulation is placed beneath the ice, this helps keep the temperatures at a controlled level.  PlastiSpan insulation board meeting CAN/ULC-S701, Type 1 is adequate for this service. If a higher compressive strength material is required due to additional compressive loads on the insulation, PlastiSpan HD insulation board meeting CAN/ULC-S701, Type 2 or PlastiSpan insulation board meeting CAN/ULC-S701, Type 3 may be used.

Installation

Plasti-Fab PlastiSpan insulation board is placed under the floor slabs of artificial ice rinks to lessen the effect of soil frost heaving below the ice surface. It also shortens the time required to make or remove an ice surface and may also allow a reduction in the capacity of the refrigeration equipment. These benefits are significant as they reduce the energy costs for the operation of the ice rink.

ir-1

So the next time you are out skating, playing hockey or even curling, you just might be skating right over our insulation – and you would never know it! Visit www.plastifab.com for more information on ice rinks and other commercial solutions using the higher compressive resistant insulation.

No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: